The Truth About Fiber Cement Board

FIBRE CEMENT BOARDS are a composite material that has a cement matrix and fibres. It is a very popular construction material for buildings.

This material is used for many different applications, such as external cladding, interior lining and partitions. It has excellent fire, water and termite resistance properties.
Termites

The Truth Is You Are Not The Only Person Concerned About FIBRE CEMENT BOARD
While many homeowners believe that FIBRE CEMENT BOARD is termite-resistant, this is not always the case. Termites are a common problem that can cause significant damage to your home.

Termites are often found in the ground where they can easily access wood near your home’s foundation. They can also infest wooden porches, floor joists in crawlspaces and basement windows.

Workers termites use mud and saliva to create tunnels that help them stay protected while traveling to and from food sources above the ground. These tunnels are about 1/4 to 1 inch in diameter and can stretch hundreds of feet in length.

As they travel, they eat the wood that they are passing. This can cause serious structural damage to your home, particularly the foundation.

To prevent this, be sure to check for softened or weakened wood near your home’s foundation that can be accessed easily by termites. This could be a result of the weather, moisture in the soil or an excessive amount of mulch applied to the area.

If you are concerned about termites, floor insulation boards
consider installing a termite-resistant material such as Hardie board or fibre cement siding. These materials are made of a cementitious material that termites do not find appealing, which helps to keep them away from your home.

As a rule of thumb, make sure to use only high-quality building materials for your home. If you are concerned about the cladding on your home, have it tested to be sure that it is asbestos-free. A professional will be able to tell you whether it is or not and give you full peace of mind.
Pests

The Truth Is You Are Not The Only Person Concerned About FIBRE CEMENT BOARD
When it comes to your new home, the last thing you want is a pest infestation that threatens your family’s health and safety. That’s why it is crucial to invest in a building and pest inspection from the professionals at Action Property Inspections.

Termites and carpenter bees are the main players when it comes to pest damage, but there are also other unseen culprits like woodpeckers, birds, squirrels, and more. Fortunately, fiber cement siding has some pretty impressive insect resistance features to keep pests at bay.

One of the most notable is the fact that it’s engineered to withstand the rigors of the elements and won’t crack, warp, or dent in the face of a major storm. It’s not just your average fiberglass panel, either; James Hardie’s Engineered for Climate(r) clad fiber cement siding is specifically designed to protect you from the weather that mother nature throws your way.

Choosing the right materials for your next home can be a difficult decision, but it’s an investment that will pay off in the long run. To make sure you’re getting the best deal possible, it’s smart to have a thorough pre-purchase building and pest inspection performed. It’s worth the effort for peace of mind and a healthier, happier home. The best part is you won’t have to worry about the cost of any remedial work down the line. Book your building and pest inspection today. It’s the smartest move you’ll make.
Water

FIBRE CEMENT BOARD is used for many different types of building materials including external and internal cladding, wall lining and fire-rated partitions. It is a popular choice because it offers superior strength, durability and weather resistance properties.

If you are installing a home with FIBRE CEMENT BOARD, it is important to know how water affects the board and to avoid common problems. There are several factors that can influence how water penetrates the board.

First, you need to know what the board is made of and what the specific characteristics of the material are. FIBRE CEMENT BOARD is a composite of cement, cellulose fibres, synthetic fibres, and other additives that increase its physical properties and make it more durable.

It is a very flexible material that allows for a lot of creativity when it comes to colors and textures. It is also resistant to rot, mildew, corrosion and UV light.

During the production process, fibers are mixed with the other ingredients and then formed into a composite through a drying and curing process. The final product is a very lightweight material that is easy to handle and install.

Another issue that can impact a FIBRE CEMENT BOARD is water penetration from outside the building. This can happen through the finish weather side coating and from behind the surface of the siding.

You can prevent this from happening by using a drainable building wrap that will allow water to run off the siding into a drainage system in the framing. Then you need to seal the ends of the siding with a waterproofing solution that will stop the moisture from entering the building. You can use a special type of painters tape to create a tight seal at the end of each board and then apply the waterproofing generously.
Fire

The Truth Is You Are Not The Only Person Concerned About FIBRE CEMENT BOARD
Fiber cement board is one of the most popular types of building cladding materials used today. It is durable, extremely weather-resistant and very non-combustible. This makes it a great choice for many applications and is recognized by fire departments throughout the country.

However, fibre cement boards are not as resistant to high temperature exposure as other building claddings, such as wood composite products (such as hardboard and Masonite), aluminum siding and vinyl. As a result, a large number of buildings have been burned in recent years, and the resulting damage can negatively impact the integrity of your FIBRE CEMENT BOARD.

In addition, the fire temperature may cause the cellulose fibers to melt and detach from the fibre cement board, which could also lead to the failure of your FIBRE CEMENT BOARD. This is because lower portions of the cladding will be exposed to the heat first and, as a result, they will begin to degrade and fall off more quickly.

This effect was tested on a large-scale facade model to assess the effects of the fire temperatures on the cladding. In this study, samples were retrieved from external cladding panels that were mounted on the facade model at specific locations above the combustion chamber.

Several tests were conducted to evaluate the deterioration of the cladding by means of a three-point bending flexural test. This is a universal method for assessing fibre cement boards, cited in Standard EN 12467.

The test results were compared with the acoustic emission analysis carried out on a similar sample of a different type of board to identify the degree of degradation during the initial phase of fire exposure. The acoustic emissions resulting from the breaking of fibres and the cement matrix were recognised as well as those resulting from the breaking of the cladding alone. These events were then averaged to determine a characteristic of the background acoustic spectrum.
Maintenance

The Truth Is You Are Not The Only Person Concerned About FIBRE CEMENT BOARD
If you are building a home and have decided on fiber cement as your siding material, then you may be wondering how to keep it in good condition. After all, the materials is supposed to be low maintenance and you have invested a fair amount of money into it.

However, you must remember that just because fiber cement is a low maintenance product does not mean it isn’t going to require some upkeep in the future. The best thing you can do to maintain your fiber cement board is to regularly clean it.

This is not only good for keeping it looking its best but also helps prevent any damage that may occur from mold or mildew. This can be a common problem on homes that are located in warm, humid climates or that have a lot of shade.

You can also prevent moisture from getting inside your fiber cement board by making sure that water doesn’t work its way into any cracks or other small holes. You can do this by filling them with cementitious patching compound.

Once the compound has cured, you can sand it down and paint it to match the rest of your fiber cement board. This will help seal out any water or insects that might be able to get in and cause damage to the fiber cement board or your home.

Another important step to take when cleaning your fiber cement board is to make sure that you are wearing all the proper safety gear. This includes eye goggles, a dust mask and gloves. These are important because they will protect you from any dirt that might be on your fiber cement board and prevent it from getting into your eyes or your respiratory system.