Chili Technology offers the ChiliPad Cube, also known as the ChiliPad, a mattress pad featuring a built-in temperature regulation system that provides both heating and hvac.

The pad is constructed with a central control unit known as the Cube, which is connected to a network of silicone microtubes. ChiliPad owners add hot or cold water, which circulates through the tubes before going to the Cube. The temperature can be adjusted manually or with a wireless remote; owners can preset the temperature in one degree increments at anywhere from 55 to 110 Fahrenheit (13 to 43 Celsius).

The ChiliPad can be obtained in a total of seven areas. Four of these sizes Single, Twin XL, Full, and Split California King are single-zone pads, meaning possess one Cube unit and provide one temperature-regulated surface. Another three sizes Queen, King, and Master are dual-zone pads, making them a good choice for couples with differing temperature preferences. A Twin-size ChiliPad were previously available, but eventually discontinued due to low demand.

What You Need to Know About The ChiliPad

– The ChiliPad Cube single- and dual-zone mattress pads are most suitable for:

– Single sleepers and couples who experience temperature-related discomfort (either too hot or too cold) during the evening hours.

– Homeowners who would like to save money on their heating bills.

– Pregnant as well as other sleepers with medical conditions that induce excessively hot or excessively cold sleeping.

The ChiliPad Cube may not be suitable for:

– Sleepers who do not experience significant temperature-related issues through the night.

– People who awaken easily noise.

– Those who find mattress pads beneath their fitted sheets uncomfortable.

How Does the ChiliPad Work?

Follow these five steps to operate the ChiliPad Cube:

Secure the mattress pad

The pad should be unfolded and placed leading of the mattress and underneath a fitted sheet. The pad also has elastic corner straps that fit around the edges of the mattress for added stability. The microtubes could be placed at the head or foot for the bed, depending on the owner’s preferences.

Connect the tube into the cube

The Cube should rest on a set surface with at least two feet (24?) of breathing room on the two of you. It should be plugged into an AC outlet, and can be positioned with normal water tank along with to prevent leakage. Owners can utilize risers to position the Cube beneath their bed. Connect the male end of your external tube attachment into the Cube’s female connector. When connecting the tube to the Cube, nowhere release button should be facing moving upward.

Fill the cube with water

The Cube has a job opening on the very best in which water ought to added. Unscrew the cap and add distilled water as mandated. Once the Cube has reached full water capacity, turn gear on while using power button near the opening. The Cube will produce an easy beep, which usually the tubes will in order to fill with water. As water is shipped into the tubes, owners will have to add more distilled water to the Cube add water’ indicator light goes finally out. They should then screw the cap back into place.

Please note: when new, the ChiliPad’s water tank should possess a trace regarding water inside; this indicates the product has undergone quality control tests ahead of packaging. If the water is absent, your own ChiliPad may not have been properly suggestions.

Adjust temperature

Two buttons one with a flame icon and another with a snowflake icon reside next on the power button. Owners use these two buttons boost or limit the temperature in one-degree increments until their desired setting is have got to. A temperature reading displays the owner’s setting, not the ChiliPad’s current ambient temperature. Once the temperature recently been properly adjusted, the number will blink three times. Most temperature changes work within quarter-hour.

In accessory for manual controls, owners can program temperatures with an invisible remote. To activate the remote, hold down the Cube’s power button for five seconds; the unit will beep and show a blinking 888′ on temperature show. Turn on the far off at this point; the unit will beep again and display the present temperature preset. To program the remote with a dual-zone pad, make sure one for the Cubes remains off throughout this tactic.

Power off cube essential

To turn off the Cube, simply press the power button although is cycling. The display will immediately turn off, though followers may run for several moments much more time. Owners are advised to unplug the Cube when do not plan the their ChiliPad in the following 24 a long while. To drain the Cube, use an H-shaped tool that includes the ChiliPad; the cross-shaped end is employed to drain theCube, along with the hollow end is once upon a time drain the mattress mattress pad.

Please keep in mind that dual-zone Chilipads (Queen, King, and California sizes) feature two microtube networks and Cube units. To operate these, simply follow the steps as listed above for both sides of the information presented.

Sizing and Pricing

Current prices for all available ChiliPad sizes are listed inside the table drop some weight .. Please note the pricing differences between pads whilst Cube included and replacement pads

ProductNew (Pad and Cube)Replacement (Pad Only)

Single-size ChiliPad Cube (Single-zone)$499$249

Twin XL-size ChiliPad Cube (Single-zone)$599$289

Full-size ChiliPad Cube (Single-zone)$699$299

Queen-size ChiliPad Cube (Dual-zone)$999$379

chilipad reviews

King-size ChiliPad Cube (Dual-zone)$1,199$399

California King-size ChiliPad Cube (Dual-zone)$1,199$399

Split California King-size ChiliPad Cube (Single-zone)$649$289

Additionally, customers may purchase replacement Cube units for $399.

ChiliPad Features and Specs

The ChiliPad’s features, functions, and product specifications include the following:

Temperature range: The Cube can be programmed in one-degree increments to reach temperatures any place from 55 to 110 Fahrenheit (13 to 43 Celsius). Certain factors because bedroom temperature and sleeper weight may affect temperature delivery.

Cube dimensions: The Cube measures 9 1/4 wide, 9 1/4 long, and 7 1/2 tall. It weighs roughly nine pounds.

Energy usage: The average ChiliPad uses 80 t.

Power sources: The Cube’s power cord must be plugged into an AC outlet to get results. The remote control requires two AAA battery packs.

Cord length: The cord measures eight feet (8) in span.

Material composition: The mattress pad is established from a polyester and cotton incorporate. The microtubes are associated with medical-grade silicon.

ChiliPad weight limit: The information presented operates with up to 500 pounds per area. However, heavier individuals don’t experience food with caffeine . temperature range as lighter individuals.

ChiliPad dimensions: The table below lists width, length, and thickness dimensions for your ChiliPad in each available size.

ChiliPad SizeZonesDimensions (Width x Length x Height)

Single130W x 75L x 3/4H

Twin Extra Long (XL)138W x 80L x 3/4H

Full153W x 75L x 3/4H

Queen260W x 80L x 3/4H

King276W x 80L x 3/4H

California King272W x 84L x 3/4H

Split California King136W x 84L x 3/4H

What’s Offered with a ChiliPad Purchase?

The belongings in a ChiliPad box be based upon whether a single- or dual-zone pad was obtained a. A full breakdown shows up in the table below.

Type of PadNumber of PadsNumber of CubesNumber of RemotesNumber of Drain Keys

Single-zone1111

Dual-zone1211

Additionally, all ChiliPad Cubes come using a user’s manual, warranty, and registration card stoock.